SDS

Product Name: Smart Spacer, Fiber Spacer Page 9 of 9 Revision date: 10-Jun-2017
999 Production Drive Wakefield MI, 49968
1-906-229-9100
www.extremetool.com
16. OTHER INFORMATION
SDS Scope:
USA: Conforms to 29 CFR 1910.1200 (2012 OSHA Hazard Communication Standard)
Prepared by: Extreme Tool & Engineering
Reason for revision: N/A
DISCLAIMER: This Safety Data Sheet [SDS] information is provided based on the Hazard Communication Regulations for your
region or country and for the use of the persons required to receive this information under those regulations. The information is
neither designed nor recommended for any other use or for use by any other person, including for compliance with other laws.
Extreme Tool & Engineering does not warrant the suitability for use of this SDS for any other material or product not specifically
identified herein. Extreme Tool & Engineering does not warrant the accuracy or authenticity of this SDS unless it has been obtained
directly from Extreme Tool & Engineering, or posted or viewed on Extreme Tool & Engineering website This SDS is based on
information that is believed to be reliable, but may be subject to change as new information becomes available. Because it is not
possible to anticipate all conditions of use, additional safety precautions may be required. Since the use of this material is not under
Extreme Tool & Engineering control, each user is responsible for making its own determination as to the safe and proper handling
of this material in its own particular use of this material. EXTREME TOOL & ENGINEERING MAKES NO REPRESENTATION OR
WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Each user should read and understand this information and incorporate it into individual site safety programs as
required by applicable hazard communication standards and regulations.
End of Safety Data Sheet