Smart. Fiber Spacers 999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com SMART, FIBER SPACERS SAFETY DATA SHEET North America U.S. GHS Format Revision Number: 1 Revision date: 20-Jun-2017 1. IDENTIFICATION OF THE PRODUCT, RAW MATERIAL AND COMPANIES Product Name: Smart Spacer, Fiber Spacer Company Name: Extreme Tool & Engineering Inc.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 2. HAZARDS IDENTIFICATION The additives in this product (if any) are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com Other Information: OSHA, IARC and/or NTP have listed carbon, titanium dioxide, crystalline silica (quartz), respirable glass and certain heavy metals, present in some colorants and fillers, as carcinogens. If these materials are present in this product at significant quantities, they are shown in Section 2/3.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 5. FIRE-FIGHTING MEASURES Autoignition Temperature: No information available Explosive Properties: Avoid generating and accumulating dusts; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Suitable Extinguishing Media: Water spray mist or foam.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure limits: No components with information, unless noted below Engineering Measures to Reduce Exposure: Handle in accordance with good industrial hygiene and safety practice. Provide for appropriate exhaust ventilation at machinery.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 10. STABILITY AND REACTIVITY Stability: Stable under ambient conditions. Hazardous polymerization does not occur. Conditions to Avoid: To avoid thermal decomposition, avoid elevated temperatures. Heating can result in the formation of gaseous decomposition products, some of which may be hazardous. Do not exceed melt temperature recommendations in product literature.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 11. TOXICOLOGICAL INFORMATION Acute Toxicity LD50/oral/rat: >5000 mg/kg (estimated) LD50/dermal/rabbit: >2000 mg/kg estimated Inhalation: Pellet inhalation unlikely due to physical form. Eye Contact: Resin particles, like other inert materials, are mechanically irritating to eyes. Skin Contact: Not a hazard with pellets during normal industrial use. Ingestion: Pellet ingestion unlikely due to physical form.
999 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com in male mice, no firm conclusion was drawn for the carcinogenicity. In a study that administered styrene (125 and 250 ppm) in the drinking water of rats for 2 years, there was no evidence of carcinogenicity. In other chronic inhalation toxicity studies, rats were exposed to styrene via inhalation at concentrations up to 300 ppm for 4-6 hours/day, 5 days/week, for 1 year or up to 1000 ppm for 2 years.
99 Production Drive Wakefield MI, 49968 1-906-229-9100 www.extremetool.com 16. OTHER INFORMATION SDS Scope: USA: Conforms to 29 CFR 1910.1200 (2012 OSHA Hazard Communication Standard) Prepared by: Reason for revision: Extreme Tool & Engineering N/A DISCLAIMER: This Safety Data Sheet [SDS] information is provided based on the Hazard Communication Regulations for your region or country and for the use of the persons required to receive this information under those regulations.
