Specifications

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesHigh-performance 10/25 Gigabit Aggregation Switch

WWW.EXTREMENETWORKS.COM

Data Sheet

ExtremeSwitching

™

X695

High-performance 10/25 Gigabit Aggregation Switch

The ExtremeSwitching X695 is a purpose-built 48 x 25Gb SFP28portswitch

with 8 x 40/100Gb QSFP28 uplinks designed for high-performance

enterprise and aggregation applications. The X695 can support a range

of interface speeds, including 1Gb, 10Gb, 25Gb, 40Gb, 50Gb and 100Gb,

all in a compact 1RU form factor. This enables the ExtremeSwitching X695

to be ﬂexibly deployed in Enterprise LAN or top-of-rack applications. The

following X695 switch model is available:

X695-48Y-8C

• 48 x 1Gb/10Gb/25Gb SFP28 ports

• 8 x 10Gb/25Gb/40Gb/50Gb/100Gb QSFP28 ports

Flexible Deployment Options

The X695 can handle a range of high bandwidth applications, including

high-density 10Gb/25Gb top of rack aggregation, as well as spine/leaf

deployments as an edge leaf switch. It can also ﬂexibly support uplinks

at 25Gb, 40Gb, 50Gb or even 100Gb rates. A range of SFP+ and QSFP+

optical transceivers are available to support 1Gb, 10Gb and 40Gb Ethernet,

while SFP28 and QSFP28 optical transceivers can be used to support 25Gb,

50Gb and 100Gb Ethernet applications.

Highlights

• High-Density 25 Gigabit switch for spine/

leaf and aggregation applications

• 48 ports of 10/25 Gigabit Ethernet

connectivity plus 8 ports of 40/100

Gigabit connectivity

• Compact 1U form factor for reduced

power and footprint

• Extreme Integrated Application Hosting

enables third-party applications without

impact to switch performance

• Hot-swappable modular power and fans

• Front-to-back and back-to-front air

ﬂow options

• AC and DC power supply options

Summary of content (5 pages)

PAGE 1
Data Sheet Highlights • High-Density 25 Gigabit switch for spine/ leaf and aggregation applications • 48 ports of 10/25 Gigabit Ethernet connectivity plus 8 ports of 40/100 Gigabit connectivity • Compact 1U form factor for reduced power and footprint ExtremeSwitching™ X695 • Extreme Integrated Application Hosting enables third-party applications without impact to switch performance High-performance 10/25 Gigabit Aggregation Switch • Hot-swappable modular power and fans • Front-to-back and back-to-front
PAGE 2
Intelligent L2/L3 Switching The ExtremeSwitching X695 supports intelligent Layer 2 switching, as well as Layer 3 IPv4/IPv6 routing, including policy-based switching and routing. The X695 can simplify network operation with its ExtremeXOS modular operating system, used across a wide range of ExtremeSwitching networking products. The high availability ExtremeXOS operating system reduces operational overhead with a single OS across the network.
PAGE 3
Product Specifications Model X695-48Y-8C • 48 x SFP28 1Gb/10Gb/25Gb ports • 8 x QSFP28 40Gb/100Gb ports • Up to 8 x 40Gb/100Gb Ethernet interfaces • Up to 4 x 50Gb Ethernet interfaces (partitioned) Ports • Up to 8 x 10Gb/25Gb Ethernet interfaces (partitioned) • 1 x Serial console port RJ-45 • 1 x 10/100/1000BASE-T out-of-band management port • USB Type A storage port Switching capacity: 4.0 Tbps Line Rate (2.0 Tbps ingress / 2.
PAGE 4
Scaling and Performance • MAC Addresses: 290K • IPv4 LPM Entries: 128K max w/ALPM • IPv4 Hosts: • with min LPM IPv4 entries: 180K • with max LPM IPv4 entries: 164K • IPv6 LPM (/64) Entries: 64K max w/ALPM • IPv6 Hosts: 56K max • IP Multicast Groups - 8K • IP Multicast (s,v,g) entries - 136K max • Flexible Universal Forwarding Tables (UFT) • 4092 user-created VLAN/VMANs • 9216 Byte Max Packet Size (Jumbo Frame) • 8 queues per port • 8k ingress rules • 1K egress rules • Policy Capabilities Regulatory and Saf
PAGE 5
Ordering Notes Customers ordering an X695 switch receive the base switch along with an ExtremeXOS Advanced Edge software license. Power supplies, fan modules, power cords, transceiver/optics and optional Software Feature Packs must be separately ordered. It should be noted that six (6) fan modules and at least one Power Supply Unit (PSU) are required to operate the X695. A second PSU is required for power redundancy. Air flow direction of the fan modules and PSU must be the same.