Installation Guide

Figure 85: Summit X450e-24p Switch Rear Panel
Summit X450e-48t Switch Ports and Slots
The front panel of the Summit X450e-48t switch includes:
• Forty-four fixed autosensing 10/100/1000 BASE-T ports (ports 1–44) that provide 44 Gbps of high-
density copper connectivity.
• Four combination ports (ports 45–48) using RJ45 connectors and SFPs to provide 4 Gbps of copper
or
fiber connectivity
For more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see Summit X450, X450a, and X450e Series
Switch LEDs on page 101.
• Serial console port used to connect a terminal and perform local management.
Figure 86: Summit X450e-48t Switch Front Panel
The rear panel of the Summit X450e-48t switch (Figure 87 on page 98) includes:
• Slot for one of the Summit option cards listed in the following table. These port option cards allow
you to add one or two high-speed uplink ports to the switch.
Table 28: Port Option Cards for Summit X450e Series Switches
Option Card Model Type of Added Ports For More Information, see . . .
XGM2-2xn option card 10-gigabit XENPAK modules #unique_59
XGM2-2xf option card 10-gigabit XFP modules #unique_60
Summit Switches Summit X450e Series Switches
Summit Family Hardware Installation Guide 97