Installation Guide

For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• Two unpopulated SFP+ ports (ports 25 and 26) that provide 20 Gbps of fiber connectivity.
• Ethernet management port.
• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local
management.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs on page
78.
Figure 53: Summit X440-24p-10G Switch Front Panel
1 = Ethernet management port 5 = Console port
2 = 10/100/1000BASE-T PoE ports 6 = Combination ports
3 = SFP ports 7 = SFP+ ports
4 = Stack number indicator
The rear panel of the Summit X440-24p-10G switch (Figure 54 on page 70) includes:
• Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module. See Installing an
EPS-C2 Power Supply on page 380 for more information.
• AC power input socket.
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 54: Summit X440-24p-10G Switch Rear Panel
1 = AC power input connector
2 = Redundant power connector
Summit X440-24p-10G Switch Ports and Slots Summit Switches
70 Summit Family Hardware Installation Guide