Installation Guide

Output
-50 V , 7.5 A max, 375 Watts
12 V , 10.5 A max, 126 Watts
Maximum continuous DC output shall not exceed 500 Watts.
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to Power Cord Requirements for AC-Powered Switches
and AC Power Supplies on page 653.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Eciency >70% @ 100% load
Heat dissipation, Watts, BTU/hr 158 W, 539.1 BTU/hr
Power consumption, Watts, BTU/hr 659 W, 2248.6 BTU/hr
Ambient operating temperature 0°C to 40°C (32°F to 104°F)
For use with the Summit X450e-48p and X250e-48p switches
Must be installed in the EPS-C chassis (Model 10912)
Operational voltage range
90 to 264 V
Nominal input ratings
100-250 V , 50/60 Hz, 10 A
Nominal input current
7 A @ 115 V (low-line)
3.5 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Maximum inrush current 17 A @ 115 V/60 Hz, maximum load
Output power 600 W
Power supply cord type AC
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to Power Cord Requirements for AC-Powered Switches
and AC Power Supplies on page 653.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Eciency 85% nominal
Heat dissipation, Watts, BTU/hr 219 W, 747.3 BTU/hr
Power consumption, Watts, BTU/hr 801 W, 2733.1 BTU/hr
Ambient operating temperature 0°C to 40°C (32°F to 104°F)
Output Ratings for EPS-C chassis with 1, 2, or 3 installed EPS-600LS units
One EPS-600-LS unit 582 W output: –48 V/9 A (432 W), 12 V/12.5 A
Technical Specifications
For use with the Summit X450e-48p and X250e-48p
switches
Summit Family Hardware Installation Guide 649