Installation Guide

Figure 43: Summit X440-24t-10G Switch Front Panel
1 = Ethernet management port 5 = Console port
2 = 10/100/1000BASE-T ports 6 = Combination Ports
3 = SFP ports 7 = SFP+ ports
4 = Stack number indicator
The rear panel of the Summit X440-24t-10G switch (Figure 44 on page 64) includes:
• Redundant power input connector for optional connection to the EPS-C2 External Power Module.
The connecting redundant power supply cable is shipped with the power module unit. For more
information, see Installing an RPS-500p Redundant Power Supply on page 396 or Installing an EPS-
C2 Power Supply on page 380.
• AC power input socket.
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 44: Summit X440-24t-10G Switch Rear Panel
1 = AC power input connector
2 = Redundant power connector
Summit X440-L2-24t Switch Ports and Slots
The front panel of the Summit X440-L2-24t switch includes:
• Twenty-four
fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of high-
density copper connectivity.
• Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
Summit X440-L2-24t Switch Ports and Slots
Summit Switches
64 Summit Family Hardware Installation Guide