Installation Guide

Figure 40: Summit X440-24t Switch Rear Panel
1 = AC power input connectors 3 = Redundant power connector
2 = Stacking ports
Summit X440-24tDC Switch Ports and Slots
The front panel of the Summit X440-24tDC switch includes:
• Twenty-four
fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of high-
density copper connectivity.
• Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a
fiber port. For
more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
• Ethernet management port.
• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local
management.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs on page
78.
• Stack number indicator.
4 5
6
32
1
Figure 41: Summit X440-24tDC Switch Front Panel
1 = LEDs
4 = Stack number indicator
2 = 10/100/1000BASE-T ports 5 = Ethernet management port/Console port
Summit X440-24tDC Switch Ports and Slots Summit Switches
62 Summit Family Hardware Installation Guide