Installation Guide

Table Of Contents

• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local

management.

• LEDs to indicate port status and switch operating conditions

For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs on page

78.

• Stack number indicator.

Note

If you are desktop mounting a Summit X440-8t switch, you must use the four rubber pads to

maintain sucient airﬂow around the unit See Installing Summit Switches in Desktop or Free-

Standing Mode on page 327 for installation instructions.

Note

If you are rack mounting Summit X440-8t switches, you must use special "keep out" rack

mounting hardware. The rack mounting hardware is included with the unit. You must reserve

3 RU of space for the installation. See Installing a Summit X430-8p or X440-8t Switch in a

Rack on page 316 for installation instructions.

Figure 35: Summit X440-8t Switch Front Panel

1 = Ethernet management port

4 = Stack number indicator

2 = 10/100/1000BASE-T ports 5 = Console port

3 = SFP ports 6 = Stacking Ports

The rear panel of the Summit X440-8t switch provides an AC power input socket. The internal AC

power supply operates from 100 VAC to 240 VAC.

Figure 36: Summit X440-8t Switch Rear Panel

1 = AC power input connector

Summit Switches Summit X440-8t Switch Ports and Slots

Summit Family Hardware Installation Guide 59