Installation Guide

1 = Ethernet management port 3 = SFP ports
2 = 10/100/1000BASE-T ports 4 = Console port
The rear panel of the Summit X430-24t switch (shown in Figure 30) includes:
• AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
1
0.75A
Figure 30: Summit X430-24t Switch Rear Panel
1 = AC power input connector
Summit X430-24p Switch Ports and Slots
The front panel of the Summit X430-24p switch includes:
• Twenty-four
fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of high-
density copper connectivity. In addition, all of these ports (ports 1-24) also support the POE protocol
IEEE802.af and POE+ protocol IEEE 802.at standard. Using the POE protocol, the switch can provide
15.4 Watts of power on a single port up to a total power budget of 370 Watts. Using the POE+
protocol, the switch can provide 30 Watts of power on a single port up to a total power budget of
370 Watts.
• Four unpopulated 1000BASE-X SFP ports (ports 25–28) that provide 4 Gbps of fiber connectivity.
Note
All the twenty-four 10/100/1000BASE-T ports and all four of the 1000BASE-X SFP ports
can be used simultaneously.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
• Ethernet management port.
• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local
management.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X430 Series Switch LEDs on page
55.
Summit Switches
Summit X430-24p Switch Ports and Slots
Summit Family Hardware Installation Guide 53