Installation Guide

Summit X350-24t Switch Ports and Slots
The front panel of the Summit X350-24t switch includes:
• Twenty fixed autosensing 10/100/1000BASE-T ports (ports 1–20) that provide 20 Gbps of high-
density copper connectivity
• Four combination ports (ports 21-24) using RJ45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPS, see the Extreme Networks Pluggable Transceivers Installation Guide.
• LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see Summit X350 Series Switch LEDs on page
49.
• Serial console port used to connect a terminal and perform local management.
Figure 23: Summit X350-24t Switch Front Panel
The rear panel of the Summit X350-24t switch (as shown in Figure 24 on page 47) includes a slot for
one of the Summit option cards listed in the following table. These port option cards allow you to add
one or two high-speed uplink ports to the switch.
Table 10: Port Option Cards for Summit X350 Series Switches
Option Card Model Type of Added Ports For More Information, see . . .
XGM2-2xn option card 10-gigabit XENPAK modules #unique_59
XGM2-2xf option card 10-gigabit XFP modules #unique_60
XGM2-2sf option card 10-gigabit SFP+ modules #unique_61
XGM2-2bt option card Fixed 10GBASE-T copper #unique_62
The rear panel of the Summit X350-24t switch also includes:
• Management port with associated LEDs.
• Redundant power input connector for optional connection to the EPS-500 External Power Module
(Model No. 10907).
The connecting redundant power supply cable is shipped with the EPS-500 unit. See EPS-500
External Power Supply Unit on page 169 for more information.
• AC power input socket.
Summit X350-24t Switch Ports and Slots
Summit Switches
46 Summit Family Hardware Installation Guide