Installation Guide

Table 9: Rear Panel (continued)
Label or Type Color/State Meaning
Stack Port 1,
Stack Port 2
Steady green Link OK
Blinking green Activity
O No link
Summit X350 Series Switches
The Summit X350 series switches provide 24 or 48 Ethernet ports that deliver high-density fast
Ethernet connectivity using fixed 10/100/1000BASE-T ports.
Each Summit X350 series switch has four combination ports that provide 10/100/1000 BASE-T or SFP
connectivity for 2 Gbps of copper or fiber connectivity. A serial console port on the front panel allows
you to connect a terminal and perform local management. An Ethernet management port can be used
to connect the system to a parallel management network for administration. Alternatively, you can use
an Ethernet cable to connect this port directly to a laptop to view and locally manage the switch
configurations.
The rear panel of the switch has an option slot to accommodate one of the following Summit port
option cards:
• Summit XGM2-2xf option card, which allows you to add one or two 10-gigabit XFP modules.
• Summit XGM2-2xn option card, which allows you to add one or two 10-gigabit XFP modules.
• Summit XGM2-2bt option card, which allows you to add one or two
fixed 10GBASE-T ports.
• Summit XGM2-2sf option card, which allows you to add one or two 10-gigabit SFP+ modules.
For option card installation instructions, see Installing Expansion Modules on page 412.
Power connectors on the rear panel of the switch include an AC power input socket and a redundant
power connector. The internal AC power supply operates from 100 VAC to 240 VAC. The switch
automatically adjusts to the supply voltage. The redundant power connector allows you to connect the
switch to the EPS-500 external power supply. When a compatible external power supply is used with
the Summit X350 series switch, the internal and external power supplies are fully fault tolerant and
load-sharing. If one power supply fails, the other power supply provides
sucient power to operate the
switch.
The Summit X350 series switches include the following models:
• Summit X350-24t Switch Ports and Slots on page 46
• Summit X350-24t-TAA switch
• Summit X350-48t Switch Ports and Slots on page 47
• Summit X350-48t-TAA switch
Note
In the descriptions that follow, references to a Summit X350 series model number also apply
to the equivalent TAA-compliant switch version.
Summit X350 series switches require an ExtremeXOS version of at least 12.0.3.16 but not greater than
15.3.x.
Summit Switches
Summit X350 Series Switches
Summit Family Hardware Installation Guide 45