Installation Guide

c. Pull the cover plate away from the module slot.
Figure 382: Removing a slot Cover Plate (VIM slot cover shown)
4. Remove the new VIM or clock module from its anti-static packaging.
5. Install the VIM or clock module in the switch:
a. Carefully slide the module into the switch.
b. Insert and tighten the retaining screws you removed in step 3. The clock module uses Phillips
screws and the VIM modules use slotted screws.
1
Soli d ON=Li nk
Blin king= Activ ity
S1 S2
Su m mit X460-G2 VIM-2 x
TM
1 0 Gb E SFP+
Figure 383: Tighten Screws on the Inserted VIM Module
1 = VIM module retaining screw locations
1
11PP
PP
SS
11
00MM
HH
zz
OO
UU
TT
PP
UU
TT
TTMM-- CC LL KK
Figure 384: Tighten Screws on the Inserted Clock Module
1 = clock module retaining screw locations
Install a Versatile Interface Module in a VSP 4900 Series Switch
This section describes how to install a versatile interface module (VIM5) in the front slot of a VSP 4900
switch.
You need the following tools and materials to install a VIM5:
• ESD-preventive wrist strap
Installing Expansion Modules
Install a Versatile Interface Module in a VSP 4900 Series
Switch
Summit Family Hardware Installation Guide 447