Installation Guide

You will need four customer-supplied screws to attach the shelf to a standard 19-inch rack.
Caution
Observe all ESD precautions when handling sensitive electronic equipment.
Caution
Before rack-mounting the device, ensure that the rack can support it without compromising
stability. Otherwise, personal injury and/or equipment damage can result.
To install the VX-RPS-1000 in the 3-slot shelf, follow these steps.
1. Attach mounting brackets to the shelf, following the instructions included in the shelf packaging.
2. Attach the shelf to the rack, using the screws provided, as shown in Figure 345.
Figure 345: VX-RPS-1000 Shelf Mounted in a Rack
Installing up to Three VX-RPS-1000 Power Supplies on a
Shelf Installing External Power Supplies
410 Summit Family Hardware Installation Guide