Installation Guide

Figure 14: Summit X250e-24xDC Switch Rear Panel
Summit X250e-24p Switch Ports and Slots
The front panel of the Summit X250e-24p switch includes:
• Twenty-four
fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 2.4 Gbps of
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
• Two combination ports (ports 25–26) using RJ45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity.
For more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X250e Series Switch LEDs on page
43.
• Stack number indicator showing the position of this switch in a stacked
configuration.
• Serial console port used to connect a terminal and perform local management.
Figure 15: Summit X250e-24p Switch Front Panel
The rear panel of the Summit X250e-24p switch (shown in Figure 16 on page 38) includes:
• Ethernet management port with associated LEDs.
• Two high-performance stacking ports with associated LEDs.
• Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
10911) with full PoE power support.
Summit Switches
Summit X250e-24p Switch Ports and Slots
Summit Family Hardware Installation Guide 37