Installation Guide

4. Carefully slide the power supply all the way into the power supply bay (see Figure 294).
5. Push the power supply in until the latch snaps into place.
Caution
Do not slam the power supply into the switch.
Figure 294: Installing a Power Supply
6. To install a second power supply, repeat the procedure.
Note
If power supplies are not installed in both power supply bays, be sure to install a cover
over the unoccupied bay. Unoccupied bays must always be covered to maintain proper
system ventilation and EMI levels.
7. Connect an appropriate AC power cord to the power input socket; connect the other end of the
power cord to a grounded AC power outlet.
Warning
Always be sure that the source outlet is properly grounded before plugging the AC power
cord into the unit.
Connecting Network Interface Cables
Use the appropriate type of cable to connect the ports of your switch to another switch or router.
Installing Switches
Connecting Network Interface Cables
Summit Family Hardware Installation Guide 359