Installation Guide

Table 149: Available Stacking Cables for Extreme Networks Switches (continued)
Part
Number
Cable Type, Length Compatible Ports and Devices
10316 QSFP+ direct-attach active optical
cable, 20 meters
40-Gbps stacking ports on X465, VIM5-4x, and
VIM5-4XE
10317 QSFP+ direct-attach active optical
cable, 50 meters
QSFP+ ports on X670-G2-48x-4q switches
80-Gbps stacking ports on VIM3-40G4X modules in
x480 and X650 switches, 80-Gbps stacking ports on
VIM4-40G4X modules in X670 switches, QSFP+
ports on X670-G2-48x-4q switches
10318 QSFP+ direct-attach active optical
cable, 100 meters
10323 QSFP+ direct-attach passive
copper cable, 5 meters
21-Gbps stacking ports on X450-G2 switches
21-Gbps stacking ports on X450-G2 switches, 80-
Gbps stacking ports on VIM4-40G4X modules in
X670V switches
40-Gbps stacking ports on X465, VIM5-4x, and
VIM5-4XE
10336 QSFP+ active optical cable, 3
meters
40-Gbps ports on X670-G2 switches; 40-Gbps ports
on X770 switches; 40-Gbps VIM ports on X460-G2
switches
40-Gbps ports on X670-G2 switches; 40-Gbps ports
on X770 switches; 40-Gbps VIM ports on X460,
X460-G2, X480, and X670V switches
10337 QSFP+ active optical cable, 5
meters
10410 QSFP28 passive copper cable, 0.5
meters
100-Gbps ports on X590, X690, and X870 switches
10411 QSFP28 passive copper cable, 1
meter
10413 QSFP28 passive copper cable, 3
meters
10414 QSFP28 passive copper cable, 5
meters
10441 QSFP28 x 4SFP28 (4x25Gb) active
optical breakout cable, 5 meters
100-Gbps ports on X590, X690, and X870 switches
(see Alternative Configuration for Optics on X590,
X690, and X870 Switches on page 284 for more
information)
10442 QSFP28 x 4SFP28 (4x25Gb) active
optical breakout cable, 7 meters
10443 QSFP28 x 4SFP28 (4x25Gb) active
optical breakout cable, 10 meters
10444 QSFP28 x 4SFP28 (4x25Gb) active
optical breakout cable, 20 meters
Note
For the most recent information about available cables, contact your Extreme Networks sales
representative or refer to Extreme Hardware/Software Compatibility and Recommendation
Matrices.
Alternative Configuration for Optics on X590, X690, and X870 Switches
To use certain fiber cables and optical transceivers for stacking on X590, X690, and X870 switches, you
must use the alternative-configuration option on the configure stacking-support
Selecting Stacking Cables
Building Stacks
284 Summit Family Hardware Installation Guide