Installation Guide

Figure 2: Summit X150-24t Switch Rear Panel
Summit X150-24p Switch Ports and Slots
The front panel of the Summit X150-24p switch includes:
• Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 4 Gbps of high-
density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
• Two combination ports (ports 25–26) using RJ45 connectors and SFPs to provide 2 Gbps of copper
or
fiber connectivity.
For more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X150 Series Switch LEDs on page
30.
• Serial console port used to connect a terminal and perform local management.
Figure 3: Summit X150-24p Switch Front Panel
The rear panel of the Summit X150-24p switch includes:
• Ethernet management port with associated LEDs.
• Redundant power input connector for optional connection to the EPS-500 External Power Supply
(Model No. 10911) with full PoE power support.
The connecting redundant power supply cable is shipped with the EPS-500 unit. See EPS-500
External Power Supply Unit on page 169 for more information.
• AC power input socket.
The internal AC power supply operates from 100 VAC to 240 VAC.
Summit X150-24p Switch Ports and Slots
Summit Switches
28 Summit Family Hardware Installation Guide