Installation Guide

• Summit X150-24p-TAA switch
• Summit X150-48t Switch Ports and Slots on page 29
• Summit X150-48t-TAA switch
Note
In the descriptions that follow, references to a Summit X150 series model number also apply
to the equivalent TAA-compliant switch version.
Summit X150 series switches require an ExtremeXOS version of at least 12.0.2.25 but not greater than
15.3.x.
Summit X150-24t Switch Ports and Slots
The front panel of the Summit X150-24t switch includes:
• Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of high-
density copper connectivity.
• Two combination ports (ports 25–26) using RJ45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity.
For more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X150 Series Switch LEDs on page
30.
• Serial console port used to connect a terminal and perform local management.
Figure 1: Summit X150-24t Switch Front Panel
The rear panel of the Summit X150-24t switch (shown in Figure 2 on page 28) includes:
• Ethernet management port with associated LEDs .
• Redundant power input connector for optional connection to the EPS-160 External Power Module.
See EPS-160 External Power Module (with EPS-T) on page 168 for more information. The
connecting redundant power supply cable is shipped with the EPS-160 unit.
• AC power input socket.
The internal AC power supply operates from 100 VAC to 240 VAC.
Summit Switches
Summit X150-24t Switch Ports and Slots
Summit Family Hardware Installation Guide 27