Installation Guide

Figure 174: V300-8P-2T-W Front Panel
1 = 10/100/1000BASE-T PoE ports 2 = 1000/BASE-T 802.3bt PD up-link
Figure 175: V300-8P-2T-W Rear Panel
V300HT-8P-2X Model
The Virtual Port Extender V300HT-8P-2X model is a high-temperature model that oers the following
features:
• Eight 10/100/1000BASE-T half/full duplex PoE+ ports
• Two 10Gb SFP+ ports
• One USB port
• One console/management port
• Two DC input ports
The V300HT-8P-2X model requires that ExtremeXOS (EXOS) version 30.5 (or later) be installed on the
switch to which it is attached. For more information about
configuring EXOS for use with this
equipment, see the ExtremeXOS 16.2 User Guide.
The V300HT-8P-2X model is compatibile with the following power supplies: 40W AC PS FRU (Model
XN-ACPWR-40W).
• Model XN-ACPWR-320W-HT - a 320W AC power supply high temperature
• Model 16807 - an IS AC-DC power supply with 240W output and DIN rail compatible
Important
The high temperature power supplies for the V300HT models require field wiring. Power
supplies must be installed in accordance with local electrical codes by a licensed electrician.
Expansion Modules V300HT-8P-2X Model
Summit Family Hardware Installation Guide 199