Installation Guide

Table 42: X460-G2 Front Panel LEDs (continued)
Label or Type Color/State Meaning
FAN Steady green Normal operation
Blinking amber Failure
O No power
P1, P2
(Power Supply)
Steady green Normal operation
Steady amber Non-PoE models: PSU present, but no input
power
PoE models: Not supported
Blinking amber Power failure
O No power is attached
Ethernet Port 1-32 or 1-52 Steady green Link OK
Blinking green Activity on the indicated port
O No link or port disabled
1G SFP ports or 10G SFP+
ports 29, 30, 31, and 32 or
53, 54, 55, and 56
Steady green Link OK
Blinking green Activity on the indicated port
O No 1G or 10G link, or port disabled
Table 43 on page 134 describes the meanings of additional port LEDs on the following X460-G2 PoE
switch models:
• X460-G2-24p-GE4
• X460-G2-24p-10GE4
• X460-G2-48p-GE4
• X460-G2-48p-10GE4
• X460-G2-24p-24hp-10GE4
• X460-G2-16mp-32p-10GE4
Table 43: Additional Port LED Meanings for PoE Switches
Label or Type Color/State Meaning
All front panel ports 1-24
or 1-48
Steady green Link is OK; port is not powered
Steady amber Link is OK; port is powered; no trac
Blinking green Link is OK and transmitting packets; port is
not powered
Blinking amber Link is OK and transmitting packets; port is
powered
Slow blinking amber No link, or disabled port; port is powered
Alternating amber and
green
Port has a power fault
O Port is not powered, has no link, or is disabled
ExtremeSwitching X460-G2 Series Switch LEDs Summit Switches
134 Summit Family Hardware Installation Guide