Installation Guide

Figure 109: Summit X460-24x Switch Rear Panel
Summit X460-24p Switch Ports and Slots
The front panel of the Summit X460-24p switch includes:
• Twenty-four
fixed autosensing 10/100/1000BASE-T ports (ports 1–24). In addition to 24 Gbps of
high-density copper connectivity, these ports also provide up to 30 Watts of PoE per port.
• Eight unpopulated SFP ports (ports 21–28) that provide 8 Gbps of fiber connectivity. The SFP ports
support both 100BASE-X and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see Combination Ports and Failover on page 25.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
• 10/100/1000 Mbps management port.
• Serial console port used to connect a terminal and perform local management.
• LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see Summit X460 Series Switch LEDs on page 120.
• Stack number indicator.
Figure 110: Summit X460-24p Switch Front Panel
The rear panel of the Summit X460-24p switch (Figure 111 on page 117) includes:
• Two slots for port option cards or stacking modules (see Port Option Cards for Summit X460 Series
Switches on page 113).
• Replaceable fan tray.
Summit X460-24p Switch Ports and Slots
Summit Switches
116 Summit Family Hardware Installation Guide