Installation Guide

Figure 107: Summit X460-24t Switch Rear Panel
Summit X460-24x Switch Ports and Slots
The front panel of the Summit X460-24x switch includes:
• Twenty-four unpopulated SFP ports (ports 1–24) that provide 24 Gbps of
fiber connectivity. The SFP
ports support both 100BASE-FX and 1000BASE-X optical modules. For information about SFPs, see
the Extreme Networks Pluggable Transceivers Installation Guide.
• Eight fixed autosensing 10/100/1000BASE-T ports (ports 21–28) that provide 8 Gbps of high-density
copper connectivity.
◦ Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port.
For more information about combination ports, see Combination Ports and Failover on page 25.
◦ Ports 1 through 28 support Synchronous Ethernet. For information about this feature, see the
ExtremeXOS 22.6 User Guide.
• 10/100/1000 Mbps management port.
• Serial console port used to connect a terminal and perform local management.
• LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see Summit X460 Series Switch LEDs on page 120.
• Stack number indicator.
Figure 108: Summit X460-24x Switch Front Panel
The rear panel of the Summit X460-24x switch (Figure 109 on page 116) includes:
• Two slots for port option cards or stacking modules (see Port Option Cards for Summit X460 Series
Switches on page 113).
• Replaceable fan tray.
• Two power supply bays for either AC or DC power supplies (see Summit 300 W AC and DC Power
Supplies on page 187).
Summit Switches
Summit X460-24x Switch Ports and Slots
Summit Family Hardware Installation Guide 115