Installation Guide

CPU, Memory
Table 110: CPU, Memory
CPU/Memory
64-bit MIPS processor, 1 GHz clock, single core
1 GB ECC DDR3 DRAM
4 GB eMMC Flash
1.5 MB packet buer
Environmental Data
Table 111: Environmental Data
Environmental specifications EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage
EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation
EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational
EN/ETSI 300 753 (1997-10) - Acoustic Noise
ASTM D3580 Random Vibration Unpackaged 1.5 G
Operating conditions Temp: 0°C to 50°C (32°F to 122°F) – all models
Temp: 0°C to 60°C (32°F to 140°F) – extended temperature range models only
(16539, 16540 and 16541)
Humidity: 10% to 95% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,842 feet) – All switch models
Shock (half sine): 30 m/s2 (3 G), 11 ms, 6 shocks
Random vibration: 3 to 500 Hz at 1.5 G rms
Packaging and storage
specifications
Temp: -40°C to 70°C (-40°F to 158°F)
Humidity: 10% to 95% relative humidity, non-condensing
Packaged Shock (half sine): 180 m/s2 (18 G), 6 ms, 600 shocks
Packaged Vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at 0.2 G
Packaged Random Vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from 20 to
200 Hz
Packaged Drop Height: 14 drops minimum on sides and corners at 42 inches
(<15 kg box)
Standards
Table 112: Safety Standards
North American ITE UL 60950-1 2nd Ed., Listed Device (US)
CSA 22.2 #60950-1-03 2nd Ed. (Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
European ITE EN 60950-1:2007 2nd Ed.
EN 60825-1+A2:2001 (Lasers Safety)
2006/95/EC Low Voltage Directive
International ITE CB Report & Certificate per IEC 60950-1 2nd Ed. + National Dierences
AS/NZX 60950-1 (Australia /New Zealand)
Technical Specifications
ExtremeSwitching and Summit Switches: Hardware Installation Guide 325