Specifications

Upgrading the Summit WM Software to V5R3 release
Summit WM Maintenance Guide, Software Version 5.332
6 Login on the WM100/1000/20/200/2000 Controller, running the V5R3 release.
7 Retrieve the configuration file from the external FTP server by running the copy restore
command.
NOTE
The string in the following example depicts the WM200/2000 Controller.
SWM.wm200/2000.Extreme# copy restore <server name or IP address> <username> <source
directory> <filename>
Please input password:
8 Type the password.
9 Use the show restore command to list the current set of backup files, which will include the
retrieved configuration file.
10 Import the configuration by running the import command.
NOTE
The string in the following example depicts the WM200/2000 Controller.
SWM.WM200/2000.Extreme# import <filename>
NOTE
After the import process is completed, the Summit WM Controller will reboot.
NOTE
The Management IP will be the same as that of the controller from where the configuration is migrated.
Upgrading the two Controllers operating in ‘Availability’
mode
This section describes how to upgrade the two controllers in “Availability” mode. This section is
applicable if the ‘availability’ pair is in one of the following combinations:
Table 3: Availability pair
Controller 1 Controller 2
WM100 WM100
WM100 WM1000
WM1000 WM200/2000
WM1000 WM1000
WM200/2000 WM200/2000
WM20 WM20
WM20 WM200/2000
WM20 WM100