Specifications

Summit WM Maintenance Guide, Software Version 5.3 29
NOTE
If you are upgrading from V5R1 to V5R3 on the Summit WM100/1000/200/2000 Controller, skip Step 3 and 4.
3 Check the existing OS upgrade files by running the show osupgrade command.
4 Remove any existing OS Image files by running the no osupgrade <filename> command.
5 Check the existing RMP files by running the show upgrade command.
6 Remove any existing RPM files by running the no upgrade <filename> command.
NOTE
If you are upgrading from any of the following releases to V5R3 release via the CLI, skip Step 8 and 9.
• V4R1 GP7 to V5R3 release on Summit WM100/1000/200/2000 Controller
• V4R2 to V5R3 release on Summit WM20 Controller
NOTE
If you are upgrading from any of the following releases to V5R3 release via the CLI, skip Step 6 and 7.
• V5R1 to V5R3 release on Summit WM100/1000/20/200/2000 Controller
7 Download the software upgrade bundle (tar file) using the copy osupgrade command:
SWM.extreme.com# copy osupgrade 192.168.3.10 test /ac/rpm/buildV5R3.0/ AC-MV-gxs-
V5R3-1.tar
The copy command downloads the image from an FTP server.
8 Use the show osupgrade command to confirm the upgrade file was downloaded successfully.
SWM.extreme.com# show osupgrade
1:AC-MV-gxs-V5R3.tar
9 Download the software upgrade bundle (.tar file) by running the copy upgrade command:
SWM.extreme.com# copy upgrade 192.168.3.10 test /ac/rpm/buildV5R3.0/ AC-MV-gxs-
V5R3-1.tar
10 Confirm that the upgrade file was downloaded successfully by running the show upgrade
command.
SWM.extreme.com# show upgrade
1:AC-MV-gxs-V5R3.tar
NOTE
If you are upgrading from V5R1 to V5R3 release, you must skip Step 11.
11 Upgrade the software by running the upgrade os <file name> command. Type Yes to the Do
you wish to continue? prompt. The controller reboots after the successful installation of the
software components contained in the tar file.
NOTE
If you are upgrading from V4R1 GP7/V4R2 GP to V5R3 release, you must skip Step 12.