Specifications

Summit WM Technical Reference Guide, Software Version 5.3 189
RU_SESMGR_ID (65)
9 No Response from one
RADIUS accounting server:%s.
Possible issue with
configuration of CDR/
Accounting sub-system. Can
result in lack of accounting
reporting/CDR for system
users. Doesn't affect users
state, however, it doesn't allow
owner to provide proper billing
for services rendered. If
backup/alternate servers were
defined system will attempt to
connect to them.
Validate configuration of CDR/
Accounting settings for Radius
Server and WM-AD definitions.
If problem persists contact
Technical Support to
investigate.
Trace
129 %s
Table 51: RU_SESMGR_ID (65) logs and events
Log ID Log Message Comment Action
Major
9 Loss of active mobility tunnel
with Peer%s detected. Please
verify reachability. System will
reattempt connection.
Possible Feature Impact. Some
possible user impact as tunnel
change purges sessions
associated with peer. Users if
connected will need to re-
authenticate and renegotiate
topology profile.
Determine if outage was
caused by configuration
change to Mobility feature
(add/Remove of controllers
from Mobility Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of Mobility
controller, please review log
file to determine appropriate
root cause and corresponding
action.
Minor
33 Successfully established
mobility tunnel with peer%s.
Inter-AC Mobility State None
34 Mobility tunnel with Peer%s
reset due to membership
credentials change.
Inter-AC Mobility State.
Administrator changed mobility
domain membership list.
None
35 Mobility tunnels with Peers
reset due to membership
credentials change on current
controller.
Inter-AC Mobility State.
Administrator changed mobility
domain membership list.
None
Table 50: RADIUS_ACCOUNTING (64) logs and events (Continued)
Log ID Log Message Comment Action