Specifications

Summit WM Technical Reference Guide, Software Version 5.3 185
In
run_analysis_against_specific_li
st: cleanup_memory_for_data
for THIRD_PAP failed.
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
In
run_analysis_against_specific_li
st: cleanup_memory_for_data
for FRIENDLY_AP failed.
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
AP information. Memory leak
may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
3rd party information. Memory
leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
friendly AP party information.
Memory leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
RF Data Collector connection
information. Memory leak may
occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Unable to cleanup memory for
Scan group information.
Memory leak may occur
Internal operation issue. May
result in problems with memory
management for the system.
If problem persists Contact
Technical Support for
investigation.
Cannot change scan parameters
or list of APs when scan is in
progress. Scan update failed.
Operational error. Operator
can't change parameters for a
running scan. Scan must first
be stopped and then modified.
None
Unable to determine time when
scan results received from
RFDC. Cannot process results
and will have to drop them.
Internal operational issue. May
result in failure to identify
possible threat.
If problem persists Contact
Technical Support for
investigation.
Info
65 Sending Scan Request with
req_id zero
Summit WM series Spy feature
state
None
Received RFDC Shutdown
notify message for RFDC
session with ip addr%s
Summit WM series Spy feature
state
None
Received RFDC Shutdown
notify message for RFDC
session (id =%d)
Summit WM series Spy feature
state. Explicit shutdown
indicates result of
administrative action (Disable
feature/Role, system shutdown)
None
Received request from CM to
delete RFDC session (id =%d).
Cannot process this request.
Internal operating issue.
Possible configuration
mismatch. Deletion however
should have no impact on
running detection scans.
If problem persists Contact
Technical Support for
investigation.
Received request from CM to
delete RFDC session with ip
addr%s
Summit WM series Spy feature
state
None
Connection with RFDC session
with ip addr%s is up
Summit WM series Spy feature
state
None
Table 48: REMOTE_INS (58) logs and events (Continued)
Log ID Log Message Comment Action