Specifications

Summit WM Technical Reference Guide, Software Version 5.3 183
Unable to initialize signal
handlers
Internal operation error. May
indicate a larger problem with
system's memory resource
management.
If problem persists Contact
Technical Support for
investigation.
Unable to initialize internal
configuration data structures
Internal operation error. May
indicate a larger problem with
system's memory resource
management.
If problem persists Contact
Technical Support for
investigation.
Unable to initialize global log
bitmask
Internal operation error. May
indicate a larger problem with
system's memory resource
management.
If problem persists Contact
Technical Support for
investigation.
Major
9 %s
Threat [Known AP with invalid
SSID] detected by AP%s,
SN%s (%s). Details: RSSI:%u,
scanned channel:%u,
channel_rx:%u, bssid:%s,
ssid:%s, privacy:%s,
bssType:%s,
beaconInterval:%dms
Scan Result indication Take appropriate remedial
action to identify and
neutralize threat.
Threat [Device in ad-hoc mode]
detected by AP%s, SN%s (%s).
Details: RSSI:%u, scanned
channel:%u, channel_rx:%u,
bssid:%s, ssid:%s, privacy:%s,
bssType:%s,
beaconInterval:%dms
Scan Result indication Take appropriate remedial
action to identify and
neutralize threat.
Error in analysis_threads:
empty command arguments.
Thread will exit
Internal operation error. Thread
exist shall cause component to
terminate and be automatically
started by system's health
monitor facility. Situation
should repair itself.
If problem persists Contact
Technical Support for
investigation.
Error in analysis_thread: failed
to connect to db message
queue. Thread will exit
Internal operation error. Thread
exist shall cause component to
terminate and be automatically
started by system's health
monitor facility. Situation
should repair itself.
If problem persists Contact
Technical Support for
investigation.
Error in setting up RFDC
connection: cannot initialize
pthread attributes. Connection
cannot be setup.
Internal operation error.
Problem may prevent Rogue AP
(Summit WM series Spy)
detection from taking place.
Component may need to be
restarted.
If problem persists Contact
Technical Support for
investigation.
Error in setting up RFDC
connection: cannot set
detached pthread attributes.
Connection cannot be setup.
Internal operation error.
Problem may prevent Rogue AP
(Summit WM series Spy)
detection from taking place.
Component may need to be
restarted.
If problem persists Contact
Technical Support for
investigation.
Table 48: REMOTE_INS (58) logs and events (Continued)
Log ID Log Message Comment Action