Specifications

Summit WM Technical Reference Guide, Software Version 5.3 181
RF_DATA_COLLECTOR (36)
Table 47: RF_DATA_COLLECTOR (36) logs and events
Log ID Log Message Comment Action
Critical
1 An error has occurred in the
RF Data Collector which will
cause this component to
shutdown (and be restarted by
the system). Details:%s.
Internal operation error. Rogue
AP scan updates may be
temporarily suspended. Should
resume once component is
automatically restarted by the
system's health monitor.
If problem persists Contact
Technical Support for
investigation.
Major
9 An error has occurred in the
RF Data Collector. This error
will be ignored and the
component will attempt to
continue. Details:%s.
Internal operation error. Relay
of Rogue AP scan updates may
be temporarily suspended.
If problem persists Contact
Technical Support for
investigation.
Minor
33 An error has occurred in the
RF Data Collector which will
not interfere with system
processing. This error will be
ignored and processing
continued. Details:%s.
Internal operation error. Relay
of Rogue AP scan updates may
be temporarily suspended.
If problem persists Contact
Technical Support for
investigation.
Info
65 Received scan request with
req_id of zero
Possible operational error for
Summit WM series Spy
feature.
If problem persists Contact
Technical Support for
investigation.
Poll timeout with INS session Possible operational error for
Summit WM series Spy
feature.
Determine if outage was
caused by configuration
change to Summit WM series
Spy feature (add/Remove of
controllers from Scan Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of INS
controller, please review the
log of that controller to
determine appropriate action.
Connection with INS is up Link with INS state (Summit
WM series Spy)
None
Connection with INS is down Possible operational error for
Summit WM series Spy
feature.
Determine if outage was
caused by configuration
change to Summit WM series
Spy feature (add/Remove of
controllers from Scan Domain).
Determine if outage was
caused by network path
interruption. If interruption was
caused by failure of INS
controller, please review the
log of that controller to
determine appropriate action.