Specifications

Logs and Events
Summit WM Technical Reference Guide, Software Version 5.3162
RADIUS_CLIENT (7)
Table 38: RADIUS_CLIENT (7) logs and events
Log ID Log Message Comment Action
Critical
1 A file system error occurred.
Unable to open RADIUS
dictionary file. RADIUS client
exiting.
Possible initialization problem
for RadiusClient component.
May affect ability of users to
authenticate with system and
therefore affect their ability to
gain network access.
If problem persists contact
Technical Support to
investigate.
2 Cannot allocate memory for
either Captive Portal and/or
EAP modules. RADIUS client
exiting.
Possible resource utilization
with system. May affect ability
of users to authenticate with
system and therefore affect
their ability to gain network
access. Component may need
to be restarted to resolve issue,
or may indicate larger problem
with system's resource
utilization.
If problem persists contact
Technical Support to
investigate.
3 Failed to send process status
success to Startup Manager.
Start-up Manager will reboot
the RADIUS client.
Component may be restarted
by system health monitoring
facility. May cause temporary
outage to authentication sub-
system. Issue should self
resolve after reset.
If problem persists contact
Technical Support to
investigate.
4 No radius server available for
subnet:%s.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer. Verify
Reachability of RadiusServer
utilizing the RadiusTest feature
in GlobalSettings. If problem
persists contact Technical
Support to investigate.
Major
9 Failed to retrieve configuration
from the Config Manager. Will
retry connection to Config
Manager.
Possible problem with
configuration of authentication
sub-system, in particular may
become unable to determine
correct Radius Configuration.
Connection retry should resolve
condition.
If problem persists contact
Technical Support to
investigate.
10 Radius server changed:%s Configuration of RadiusServer
changed by administration.
None
11 Failed to get radius profile for
subnet:%s.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.