Specifications

Summit WM Technical Reference Guide, Software Version 5.3 149
21 Client with MAC%s cannot be
authorized on%s with
filterName%s. The filterName
is invalid on this%s
Validate Configuration of
RadiusServer. Validate that
matches WM-AD configuration.
If problem persists contact
Technical Support for
assistance.
Client with MAC%s cannot be
authorized with filterName%s
as this filterName is invalid on
the%s with id%d
Validate Configuration of
RadiusServer. Validate that
matches WM-AD configuration.
If problem persists contact
Technical Support for
assistance.
Client with MAC%s cannot be
authorized due to filter
problems. Unable to resolve
problem: failing MAC-based
authorization request from
client
Mapping issue for per-user
radius assigned policy. User
will be assigned default.
Minor
33 Error trying to delete all
session tracking tags (token
mappings). As this only
happens at shutdown, the
memory will be released
anyway.
No system impact but may
indicate internal logic error in
resource cleanup.
If problem persists, contact
Technical Support to
investigate.
34 Connect socket call failed. Will
not be able to communicate
with specific component.
Internal operation failure. May
result in exhausting system
memory resources.
If problem persists, contact
Technical Support to
investigate.
35 Client connected to BSSID:%s. n/a None
36 Client with MAC%s has failed
authorization on AP <%s>.
Client on specific AP has
failed authentication with
controller.
Verify that user in question is
properly configured to access
network.
37 Client session MAC%s has
failed authentication
Client on specific AP has
failed authentication with
controller
Verify that user in question is
properly configured to access
network.
Info
65 Socket write failed. The TCP
connection is down. The
authentication request will fail
for the session, however the
secMgr will try to re-connect to
the “downed” component.
Possible outage in user
authentication subsystem. User
will most likely re-attempt to
clear situation.
If problem persists, contact
Technical Support to
investigate.
66 Socket read failed with
errno%d. The TCP connection
is down. The authentication
request will fail for the
session, however the secMgr
will try to re-connect to the
“downed” component.
Possible outage in user
authentication subsystem. User
will most likely re-attempt to
clear situation.
If problem persists, contact
Technical Support to
investigate.
67 Error trying to close all
sockets. However, they will
time out on their own.
No negative impact to system.
However indicates possible
issue with resource de-
allocation.
If problem persists, contact
Technical Support to
investigate.
Table 36: SECURITY_MANAGER (4) logs and events (Continued)
Log ID Log Message Comment Action