Specifications

Summit WM Technical Reference Guide, Software Version 5.3 145
STATS_SERVER (3)
Config failed. Serial
number:%s
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
If problem persists, contact
Technical Support to
investigate.
Unable to retrieve MAC
address from AP
AP reports may be affected.
Will not be able to determine
BSSID for WM-AD assignment
reports. Other feature impact
such as RogueAP
If problem persists, contact
Technical Support to
investigate.
Upgrading AP%s image
from%s to%s
AP Image upgrade. None
Software version matches.
Serial number:%s
Ap is running adequate
firmware version. AP
Registration will proceed
None
Cannot send syslog enable
notify.
Possible impact to Log System
configuration in terms of
logging to external log system.
Retry applying syslog
configuration.
If problem persists, contact
Technical Support to
investigate.
Software config response sent
out. Serial number:%s
Configuration of AP None
Upgrading Sensor (%s) image
to ftp:%s to path:%s
AP role change None
Initial channel report has been
successfully sent to AP. Serial
number:%s
AP Channel report Feature None
Subsequent channel report has
been successfully sent to AP.
Serial number:%s
AP Channel report Feature None
Trace
129 entering handler for CIA
message %d
130 %s
Table 35: STATS_SERVER (3) logs and events
Log ID Log Message Comment Action
Critical
1 Statistics Server suffered an
internal connection failure.
Retrying connection in 5
seconds.
Internal Component Problem.
Stats Server unable to
establish proper inter-process
communications. May affect
system status reports, user
accounting and CDRs.
If problem persists, contact
Technical Support to
investigate.
Table 34: CONFIG_MANAGER (2) logs and events (Continued)
Log ID Log Message Comment Action