Specifications
Logs and Events
Summit WM Technical Reference Guide, Software Version 5.3144
4 An AP has encountered an
error processing configuration.
Error details:%s
Access Point failed to process
configuration set. AP is not
able to provide service. Verify
AP Image version to validate
that controller and AP are
properly matched.
If problem persists, contact
Technical Support to
investigate.
Major
9 Config Manager has
experienced an error which has
prevented it from properly
processing a request. CM will
continue running, however this
error may be an indicator of a
larger system problem. Error
Details:%s
Configuration/Administration
request may not have been
properly processed.
If problem persists, contact
Technical Support to
investigate.
10 Access point%s has reported a
radar interference violation
on%s. The affected radio(s)
have been placed in auto
channel select mode, and will
not respond to channel
changes until 30min after the
radar interference is last
detected.
Information. AP has responded
to Radar signal information.
None
11 AP [%s] has not responded to
a configuration change. The
AP has been sent a reboot
notification.
Access Point failed to
acknowledge configuration set.
AP may not be not be able to
provide service. Verify AP
Image version to validate that
controller and AP are properly
matched.
If problem persists, contact
Technical Support to
investigate.
Minor
33 Config Manager has failed to
process a request. Config
Manager is still running, and
system functionality is not
impaired. Error Details:%s
Configuration/Administration
request may not have been
properly processed.
If problem persists, contact
Technical Support to
investigate.
Info
65 Shutdown sequence initiated. System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc.…)
None
66 Shutting down normally. System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc.…)
None
70 New product key has been
applied. Wireless Controller
will be rebooted.
System is shutting down in
response to administration
operation (explicit request,
software upgrade, license key,
etc.…)
None
Config succeeded. Serial
number:%s
Successful confirmation of AP
configuration.
None
Table 34: CONFIG_MANAGER (2) logs and events (Continued)
Log ID Log Message Comment Action