Specifications

Summit WM Getting Started Guide, Software Version 5.1 85
Left LED
The Left LED indicates the high-level state of the Wireless AP during the initialization and discovery
process:
Left and Right LEDs
The Right LED indicates the detailed state during the initialization and discovery processes.
Composite view of the three LEDs
The Center, Left and the Right LEDs work in conjunction to indicate the general, high-level state and
the detailed state respectively.
The following table provides a composite view of the three LED lights of the Wireless AP’s state.
Table 8: Left LED and Wireless AP’s high-level state
Left LED Altitude AP’s high-level state
Off Initialization
Blinking Green Network Discovery
Solid Green Connecting with the Summit WM Controller
Table 9: Left and Right LEDs and Wireless AP’s detailed state
Left LED Right LED Altitude AP’s detailed state
Off Off Initialization: Power-on self-test (POST)
Blinking Green Initialization: Random delay
Solid Green Initialization: Vulnerable period
Blinking Green Off Network Discovery: 802.1X authentication
Blinking Green Network Discovery: Attempting to obtain IP address via DHCP
Solid Green Network Discovery: Discovered Summit WM Controller
Solid Green Off Connecting to Summit WM Controller: Attempting to register with the
Summit WM Controller
Blinking Green Connecting to Summit WM Controller: Upgrading to higher version
Solid Green Connecting to Summit WM Controller: Configuring itself
Table 10: Composite view of three LED lights
Left LED Right LED Centre LED Altitude AP’s Detailed state
Off Off Blinking
Green
Initialization: Power-on self-test (POST)
Blinking Green Blinking
Green
Initialization: Random delay
Solid Green Blinking
Green
Initialization: Vulnerable period
Blinking Red Reset to factory defaults
Solid Green Blinking
Orange
WDS scanning