Specifications

Wireless AP configuration
Summit WM Getting Started Guide, Software Version 5.182
Reset button (Hardware)
Some models of the Altitude AP have a reset button. If your model is equipped with a reset button, you
can set it to its factory default settings by pressing and holding the reset button for approximately six
seconds.
NOTE
If you press the reset button and do not hold it over six seconds, the Altitude AP will merely reboot, and not reset to
its factory defaults.
The following figure illustrates the location of the reset button on the Altitude AP.
Figure 16: Position of reset button in the Altitude AP
Resetting the Outdoor AP to its factory default settings
All models of the Outdoor AP have a reset button.
You can set the Outdoor AP to its factory default settings by pressing and holding the reset button for
approximately six seconds.
NOTE
If you press the reset button and do not hold it over six seconds, the Outdoor AP will merely reboot, and not reset to
its factory defaults.
AC/DC Power
Supply
Ethernet
Port
Reset
Button