Specifications

Summit WM Getting Started Guide, Software Version 5.1 39
Connecting the Summit WM Controller to the enterprise
network
To connect the Summit WM Controller to the enterprise network:
1 Disconnect your laptop computer from the Summit WM Controller management port.
2 Connect the Summit WM Controller management port to the enterprise Ethernet LAN. The Summit
WM Controller resets automatically.
3 Log on to the Summit WM GUI from any computer on the enterprise network. Type the following
URL in a browser to access the Summit WM GUI:
https://<IP Address>:5825
Before you proceed further, you should change the default administrator password. The following
section explains how to change the default administrator password.
Changing the administrator password
To change the administrator password:
1 Login on the Summit WM Controller using the default administrator password.
2 From the main menu, click Summit Controller. The Summit Controller screen is displayed.
3 In the left, click Management Users.
4 In the user_admin table, click admin.
5 In the Modify User Password text box, type the new administrator password.
6 In the Modify User Confirm Password text-box, retype the new administrator password.
7 Click Change Password.
NOTE
Although the default password i.e., abc123, is of six characters in length, the new password must be of eight
characters in length. For more information, see the Summit WM User Guide.
Configuring the network time
The internal clocks of the Summit WM Controller and Wireless APs on a network may differ. You
should synchronize the clocks of the Summit WM Controller and the Wireless APs to ensure that the
logs bear correct time stamps on them. For more information on reports and logs, see Chapter 10
Working with reports and displays of
Summit WM User Guide.
NOTE
The normal operation of the Summit WM Controller will not be affected if you do not synchronize the clock. The
clock synchronization is necessary to ensure that the logs bear the correct time stamps on them.