Specifications

Summit WM Getting Started Guide, Software Version 5.1 29
Some of the information listed in the table may not be relevant to your network configuration. You
should only record the information that is pertinent to your network configuration.
Table 6: Information gathering table
Configuration data Description Your entry
Accessing the
Summit WM
Controller for the
first time
• Unused IP address in the 192.168.10.0/24 subnet – This IP
address must be assigned to the Ethernet port of your
laptop computer. You can use any IP address between
192.168.10.2 and 192.168.10.255.
• Factory default IP address of Summit WM Controller – The
factory default IP address is https://192.168.10.1:5825.
You must type this IP address in the address bar of your
Web browser when you access the Summit WM Controller
for the first time.
• Login Information – The login information is as follows:
> User Name: admin
> Password: abc123
Management
Port information
• Hostname – Specifies the name of the Summit WM
Controller.
• Domain – Specifies the IP domain name of the enterprise
network.
• Management IP Address – The new IP address for the
Summit WM Controller’s management port. Change the
value in this text box to the IP address assigned to the
Summit WM Controller’s management port by your
network administrator.
• Subnet Mask – The subnet mask for the IP address to
separate the network portion from the host portion of the
address (typically 255.255.255.0)
• Management Gateway – The default gateway of the
network.
• Primary DNS – The primary DNS server used by the
network.
• Secondary DNS – The secondary DNS server used by the
network.
Hardware
information
• MAC Address – MAC address of the Summit WM
Controller’s management port
• Serial # – The Summit WM Controller’s serial #.
License Key (File) An .xml file that is provided along with the product. This file
must be applied to the product to enable all the
functionalities.