Specifications

Summit WM Controller, Access Points, and Software Solution
Summit WM Getting Started Guide, Software Version 5.126
Summit WM1000 Controller back panel
The following figure identifies the main components on the back panel of Summit WM1000 Controller.
Figure 12: Summit WM1000 Controller back panel
NOTE
The Summit WM1000 Controller may have a standard power supply (one power supply) or a redundant power supply
(two power supplies).
Summit WM1000 Controller data port cabling specification
The data ports have MT-RJ fiber optic connectors. Depending upon your network infrastructure, you
must get any one of the following cables:
● MT-RJ connector to MT-RJ connector
● MT-RJ connector to SC connector
● MT-RJ connector to LC connector
● MT-RJ connector to any other connector that is appropriate for your infrastructure
NOTE
If your infrastructure does not allow the optic fiber connection, you must get a Gigabit Media Converter to convert
the fiber connection to a copper Gigabit connection. For example, you can use Netgear GC102 converter that
receives the fiber connection and outputs traffic via the RJ45 copper port (Unshielded Twisted Pair - UTP).
Power Switch
Management Port
LED Lights
Data Ports
Console Port
Redundant Power Supply