Specifications

WM-AD configuration
Summit WM Getting Started Guide, Software Version 5.1106
Configuring filtering rules for filters in AAA network assignment
The AAA network assignment type offers the following two default filters:
● Default
● Exception
In AAA network assignment type, a Non-authenticated filter becomes unnecessary because the users
are already authenticated.
For more information, see “Configuring filtering rules for Exception filter” on page 104, and
“Configuring filtering rules for Default filter” on page 105.
Now you must configure privacy for the WM-AD. The following section explains how to configure
privacy.
Configuring privacy for WM-AD
Privacy is a mechanism that protects data over wireless and wired networks using encryption
techniques.
The Summit WM Controller provides several privacy mechanism to protect data over the WLAN. The
privacy mechanism can be classified on the basis of network assignment types — SSID and AAA.
Configuring privacy for SSID network assignment
The SSID network assignment provides three privacy options:
● None
● Static WEP
● WPA pre-shared key (PSK)
Configuring Static WEP
To configure Static WEP:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is
displayed.
2 In the left pane, click the SSID WM-AD for which you want to configure the Static WEP privacy.
The topology tab is displayed.
3 Click the Privacy tab.