User guide

WM Access Domain Services Configuration
Summit WM20 User Guide, Software Release 4.298
To create a new WM-AD name:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is displayed.
2 In the left pane, type a name that will identify the new WM-AD in the Add subnet box, and then
click Add subnet. The name is displayed in the WM Access Domains list. The Top o lo gy screen is
displayed.
The following sections describe in detail how to define the WM-AD topology parameters and configure
the WM-AD.
Topology for a WM-AD
In the Topology screen, the key choice for a WM-AD is the type of network assignment, which
determines all the other factors of the WM-AD. When you have completed defining the topology for
your WM-AD, save the topology settings. Once your topology is saved, you can then access the
remaining WM-AD tabs and continue configuring your WM-AD.
There are two options for network assignment:
● SSID – The SSID determines the WM-AD to which a user profile will be assigned (user topology/IP,
filters):
● Has Captive Portal authentication, or no authentication (as well as MAC-based authentication).
● Requires restricted filtering rules before authentication and, after authentication, filtering rules for
group filter IDs.
● Is used for a WM-AD supporting wireless voice traffic (QoS).
● Is used for a WM-AD supporting third-party APs.
● Has WEP and WPA-PSK privacy.
● AAA (Authentication, Authorization and Accounting):
● has 802.1x authentication (as well as MAC-based authentication).
● requires filtering rules for group filter IDs and default filter.
● has Dynamic WEP and WPA (WPA v.1 and WPA v.2) privacy.