User guide

Configuring the Wireless AP
Summit WM20 User Guide, Software Release 4.280
3 If applicable, modify the Wireless AP’s properties. For more information, see “Modifying a Wireless
AP’s Properties” on page 68.
4 Click Copy to Defaults to make this AP’s configuration be the system’s default AP settings. A pop-
up window asking you to confirm the configuration change is displayed.
5 Click OK to confirm resetting the system’s default AP settings.
Configuring APs Simultaneously
In addition to configuring APs individually, you can also configure multiple APs simultaneously by
using the AP Multi-edit functionality.
To configure APs simultaneously:
1 From the main menu, click Altitude APs. The Altitude APs screen is displayed.
2 In the left pane, click WAP Multi-edit.
3 In the Altitude AP list, select one or more APs to edit. To select multiple APs, select the appropriate
APs from the list while pressing the CTRL key. The Channel drop-down list is not available if using
the multi-edit feature.
NOTE
When using multi-edit configuration, any box or option that is not explicitly modified will not be changed by the
update.