User guide

Configuring the Wireless AP
Summit WM20 User Guide, Software Release 4.278
● Avoids other WLANs by reducing transmit power whenever other APs with the same channel, but
different SSIDs are detected.
To configure the DRM software:
1 From the main menu, click Altitude APs. The Altitude APs screen is displayed.
2 In the left pane, click DRM.
3 Confirm the Enable DRM checkbox is selected.
4 To refresh the Altitude APs list, click Save. The list is populated with the Wireless APs.
5 From the list of registered Wireless APs, select the checkbox corresponding to the Wireless AP you
want to configure for DRM. The DRM properties are populated with default values when DRM is
enabled.
6 In the Coverage drop-down list, select:
● Std – (Standard Coverage) Adjusts the range to the client that is the most distant, as indicated by
its signal strength.
● Shpd – (Shaped Coverage) Adjusts the range based on neighboring Wireless APs.
7 If applicable, from the Avoid WLAN drop-down list, select on.
8 In the RF Domain ID box, type a string that uniquely identifies a group of APs that cooperate in
managing RF channels and power levels. The maximum length of the string is 15 characters.
NOTE
If Suppress SSID and DRM are enabled, you must provide an RF Domain ID.