User guide

Configuring the Summit WM Controller
Summit WM20 User Guide, Software Release 4.244
The chart below summarizes the port types and their functions:
To configure the data port interfaces on the Summit WM Controller:
1 From the main menu, click Summit Switch Configuration. The Summit WM Controller
Configuration screen is displayed.
2 In the left pane, click IP Addresses. The Management Port Settings and Interfaces screen is
displayed.
The lower portion of the Summit WM Controller Configuration screen displays the number of
Ethernet ports of the Summit WM Controller:
Summit WM20 – Two Ethernet ports
Table 2: Port Types and Functions
Port Type
Host 3rd-Party AP Router WM-AD
OSPF route advertisement
No No Selectable.
Route wireless
device traffic only.
No
Wireless AP support
Yes No Yes No
Mgmt traffic support
(SNMP, HTTP, TELNET, SLP,
RADIUS, DHCP)
Selectable Selectable Selectable Selectable
Routing protocol support
(IP, OSPF and PIM)
No No Selectable No