User guide

Configuring the Summit WM Controller
Summit WM20 User Guide, Software Release 4.240
10 Type the following information:
● Hostname – Specifies the name of the Summit WM Controller
● Domain – Specifies the IP domain name of the enterprise network
● Management IP Address – Specifies the new IP address for the Summit WM Controller’s
management port. Change this as appropriate for the enterprise network.
● Subnet mask – Specifies the appropriate subnet mask for the IP address to separate the network
portion from the host portion of the address (typically 255.255.255.0)
● Management Gateway – Specifies the default gateway of the network
● Primary DNS – Specifies the primary DNS server used by the network
● Secondary DNS – Specifies the secondary DNS server used by the network
11 To save your changes, click OK.
NOTE
The Web connection between the computer and the Summit WM Controller is now lost. The IP addresses are now
set to the network you defined.
Changing the Administrator Password
It is recommended to change your default administrator password once your system is installed.