User guide

Configuring the Summit WM Controller
Summit WM20 User Guide, Software Release 4.234
Summit WM Controller Product Family
The Summit WM Controller is available in the following product families:
System Configuration Overview
The following section provides a high-level overview of the steps involved in the initial configuration of
your system:
Step 1 – Before you begin configuration
Research the type of WLAN deployment that is required.
Table 1: Summit WM Controller Product Families
Summit WM Controller Model
Number
Specifications
WM20 • Two Data ports (10/100/1000 BaseT)
• One Management port (10/100 BaseT)
• One USB Control (console) port
• One USB Server port (future use)
• Built-in PSU, Hard Drive, Fans and Controller card - not field replaceable
• Supporting up to 32 APs
WM200 • Four Data ports (10/100/1000 BaseT)
• One Management port (10/100 BaseT)
• One Console port (DB9 serial)
• Redundant and Field Replaceable Power modules
• Redundant and Field Replaceable Fan modules
• Field Replaceable Supervisory module
• Field Replaceable Network Processor module
• Field Replaceable Flash drive module
• Support up to 100 APs
WM2000 • Four Data ports (10/100/1000 BaseT)
• One Management port (10/100 BaseT)
• One Console port (DB9 serial)
• Redundant and Field Replaceable Power modules
• Redundant and Field Replaceable Fan Modules
• Field Replaceable Supervisory module
• Field Replaceable Network Processor module
• Field Replaceable Flash drive module
• Support up to 200 APs