User guide

System Configuration Overview
Summit WM20 User Guide, Software Release 4.2 31
have the same configuration, this feature will expedite deployment, as an AP will automatically
receive full configuration (including WM-AD assignment) upon initial registration with the Summit
WM Controller.
6 Wireless AP Configuration – Modify properties or settings of the Wireless AP, if applicable.
7 WM Access Domain Services (WM-AD) Setup – Set up one or more virtual subnetworks on the
Summit WM Controller. For each WM-AD, configure the following:
● Top o lo gy – Configure the WM-AD.
● RF – Assign the Wireless APs’ radios to the WM-AD.
● Authentication and Accounting – Configure the authentication method for the wireless device
user and enable the accounting method.
● RAD Policy – Define filter ID values and WM-AD Groups.
● Filtering – Define filtering rules to control network access.
● Multicast – Define groups of IP addresses for multicast traffic.
● Privacy – Select and configure the wireless security method on the WM-AD.
● QoS Policy – Configure the Qos policy.