User guide

Certifications of Other Countries
Summit WM20 User Guide, Software Release 4.2 253
Certifications of Other Countries
The Altitude 350-2 Int. AP (15958) and Altitude 350-2 Detach. AP (15939) APs have been certified for
use in the countries listed in Table 27. When the Altitude 350-2 AP is connected to the Extreme
Networks switch, the user is prompted to enter a country code. Once the correct country code is
entered, the switch automatically sets up the Altitude 350-2 AP with the proper frequencies and power
outputs for that country code.
Go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to date list of certified
countries.
NOTE
It is the responsibility of the end user to enter the proper country code for the country the device will be operated
within.
Altitude 350-2 Int. AP (15958) and Altitude 350-2
Detach. (15939) Access Points
The Altitude 350-2 AP models are Wi-Fi certified under Certification ID # WFA4279 for operation in
accordance with IEEE 802.11a/b/g. The Altitude 350-2 Altitude APs with Internal and External
antennas are designed and intended to be used indoors.
NOTE
Operation in the European Community and rest of the world may be dependant on securing local licenses,
certifications, and regulatory approvals.
Table 27: Other Country Specific Compliance Standards, Approvals and Declarations
Country Standards, Approvals, Declarations
Australia
and
New Zealand
• Altitude 350-2 Int. AP (15958) and
Altitude 350-2 Detach. AP (15939) APs
• AS/NZS 4288 (Radio)
• AS/NZX 3260 (Safety)
• AS/NZS 3548 (Emissions)
• EEE 802.11a/b/g
• IEEE 802.3af (PoE)
• EN 300 328-2:2003-4 (2.4 GHz)
• EN 301 893-1:2003-08 (5 GHz)
• EN 301 489-17:2002-08 (RLAN)
• EN 60950-1:2001 with Australia
Deviation