User guide

Summit WM20 User Guide, Software Release 4.2 237
A Summit WM20 Controller
This chapter describes the hardware specifications for the Summit WM20 Controller, including:
● “Hardware Specifications” on page 237
● “Summit WM20 Controller Panels” on page 238
● “Console Port for Summit WM20 Controller” on page 238
● “Summit WM20 Controller LED Indicators” on page 239
Hardware Specifications
This section provides details on the Summit WM20 Controller hardware specifications.
Table 19: Summit WM20 Controller Hardware Specifications
Item Summit WM20
Dimensions W x D x H Approx 17.2 x 13.3 x 2.7 (inches) 43.6 x 33.9 x 6.8 (cm) 1.5U rack height
Width dimension is without adjustable rack mounting brackets (provided).
Weight Approx 16 lbs (7.3 Kg)
Hard Drive 80 GB SATA Drive. Integrated -. Not a Field Replaceable Unit (FRU)
PSU Integrated—Not a FRU
Fans Integrated—Not a FRU
Controller Card Data/Mgmt/Control plane processing
Integrated—Not a FRU
Management Ports 1x10/100/1000 Copper Ethernet Management port—auto-sensing
1 USB 2.0 Device/Slave Port (“Control”) used as console port.
1 USB 2.0 Host Interface (“Server”) for backups (future support)
Data Ports 2x10/100/1000 Copper Ethernet Data ports—auto sensing/auto negotiating
Nominal Power Rating Nominal Input: 100-240V, 1A
Voltage Range: 90-264V~
Frequency Range: 47-63 Hz
Power (max) — 250W
Input Connector – IEC 60320 C14
Heat (max) — 850 BTU/hr
In-rush Current — 40A
LEDs 4 LEDs on front panel in a vertical column for status and activity