User guide

Performing System Maintenance
Summit WM20 User Guide, Software Release 4.2198
3 Click the Blacklist tab.
4 To add a new MAC address to the blacklist, in the MAC Address box enter the client’s MAC
address.
5 Click Add. The client is displayed in the MAC Addresses list.
NOTE
You can use the Select All or Clear All buttons to help you select multiple clients.
6 To save your changes, click Save.
To clear an address from the blacklist:
1 From the main menu, click Altitude APs. The Altitude APs Configuration screen is displayed.
2 From the left pane, click Client Management. The Disassociate tab is displayed.
3 Click the Blacklist tab.
4 To clear an address from the blacklist, select the corresponding checkbox in the MAC Addresses list.
5 Click Remove Selected. The selected client is removed from the list.
NOTE
You can use the Select All or Clear All buttons to help you select multiple clients.
6 To save your changes, click Save.